Back to top page

Laplace Transform Tool

Computes the numerical Laplace transform of experimental data or a formula f(t) at complex s = σ + iω.

Input

 

Settings

Advanced settings
This time is treated as t = 0
Subtracts the average near the start / end (start: when there is a flat part before the measurement; end: decaying data whose final value is not 0)
Larger values reduce the influence of later data
Must be 0 for the inverse transform
The limit set by the data spacing is π/Δt. Larger values are meaningless
More points give finer results but take longer
Definitions

Symbols: t[n], x[n] = input times and values; t₀ = reference time (default: the first point); τ[n] = t[n] − t₀; T = last value of τ (data length); s = σ + iω. The time unit is for display only and is not used in calculations.

Definition: F(s) = ∫₀^∞ f(t)·e^(−s·t) dt (one-sided; data before t₀ are not used)

Calculation (trapezoidal rule): F(σ + iω) ≈ Σ w[n]·x[n]·e^(−σ·τ[n])·e^(−iω·τ[n]) (w[n] = average of the neighboring spacings; half at the ends)

The integral covers only the range of the data (beyond the last point is treated as 0). The truncation effect is about e^(−σT), so it becomes small if σT is 5 or more. σ is the “damping”: the larger it is, the smaller the influence of later data. The larger ω is, the more a coarse time step Δt affects the result. Unevenly spaced times are also supported.

Preprocessing: when a baseline is selected, the average of the first (or last) 2% of the data (1–50 points) is subtracted before calculating. Moving the reference time t₀ later discards the points before it.

Inverse transform: for real, causal signals, f(τ) ≈ e^(στ)·(2Δω/π)·Σ' Re F(σ + iω_k)·cos(ω_k·τ) (ω evenly spaced from 0; half at the ends)